China saiken Pump Industry Deep Well Pump Features:
1. Large flow, full head, full voltage, suitable for agricultural and industrial use;
2. Oil-immersed motor, with a diving depth of 120 meters;
3. The use environment of the water pump, clean water at room temperature;
4. Engineering plastic impeller, suspension design;
5. The ceramic sand-resistant structure is wear-resistant.
The depth of the Stainless Steel deep well pump down to the static water surface generally does not exceed 70 meters.
(1) The inlet of the water pump must be below 1 meter at the dynamic water level, but the diving depth must not exceed the static water level by 70 meters, and the lower end of the motor must be at least 1 meter below the bottom of the well.
(2) The rated power is less than 15kw or equal to 15kw (25kw when the power supply is allowed).
If it is a submersible pump, the general submersible pump is marked with the maximum depth that can be put into the water, and it is enough not to exceed this data. If this data is not marked, the dive depth should be reduced as much as possible while ensuring water absorption. If it is a long shaft deep well pump, it is not subject to depth constraints, as long as the motor is not flooded.
The biggest feature of the deep well pump is the integration of the motor and the pump. It is a pump that is immersed in the groundwater well to pump and transport water. It is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage, and sewage treatment. Since the motor is submerged in the water together, the structure of the motor is more special than the general motor. The structure of the motor is divided into four types: dry, semi-dry, oil-filled, and wet
saikenpumps 