KCB gear pump product introduction: It is used to transport lubricating oil without solid particles, non-corrosive, temperature not higher than 150, viscosity of 51500cst or other liquids similar to lubricating oil. This series is also made of precision cast stainless steel. Transport corrosive media.
KCB gear oil pump only needs to be composed of gear, shaft, pump body, safety valve, shaft end seal, etc. The gear has high hardness and strength after heat treatment, and is installed in a replaceable bushing together with the shaft to run. The lubrication of all parts in the pump is automatically achieved by using the conveyed medium when the pump is working.
The KCB gear pump has reasonably designed oil discharge and oil return grooves to minimize the torque that the gear bears during work, so the bearing load is small, the wear is small, and the pump efficiency is high.
A safety valve is installed in the KCB gear pump as load protection. The total return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump, and it can also be adjusted according to actual needs within the allowable discharge pressure range. But note that this safety valve cannot be used as a pressure reducing valve for long-term work, and can be installed on the pipeline when necessary
Manufacturers and suppliers of gear pumps
https://www.saikenpumps.com
whatsapp: +8617731766260
Email: sales@saikenpumps.com
saikenpumps 