The role of KCB SUS gear oil pump in the chemical industry

The role of KCB SUS gear oil pump in the chemical industry
KCB SS gear oil pumps are widely used in the market. Especially in recent years, higher requirements have been put forward for countries in the food industry. Because of the safety and sanitation of stainless steel materials, stainless steel is used for food grade. KCB stainless steel gear pump is a representative material for fluids in the chemical industry.
The role of KCB non-gear pumps in the chemical industry, KCB non-gear pumps are widely used in the market. Especially in recent years, higher requirements have been put forward for countries in the food industry. Because of the safety and sanitation of stainless steel materials, stainless steel is used for food grade. KCB stainless steel gear pump is a representative material for fluids in the chemical industry.
KCB stainless steel gear oil pump is used in the chemical industry to play a very important role. It acts like a human heart to pump oil. If the stainless steel gear pump cannot be started, the entire system will stop using, delaying production.

KCB stainless steel gear oil pump is mainly composed of gear, shaft, pump body, safety valve and shaft end seal.
The gear has a higher hardness and strength after heat treatment, and it is installed in a replaceable bushing together with the shaft to run. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.
There are reasonably designed oil drain and oil return grooves in the pump, which is the smallest torque force that the gear bears during work, so the bearing load is small, the wear is small, and the efficiency is high.
The pump is equipped with a safety valve as overload protection. The total return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. But note that this safety valve cannot be used for long-term work as a pressure reducing valve, and can be installed separately on the pipeline when necessary.
Looking at the pump from the extended end of the main shaft, it rotates clockwise.
KCB stainless steel gear oil pump in the pipeline installation of the chemical industry: due to the corrosion resistance, long service life, light weight, safety and health of stainless steel pipeline pumps, it is favored by the majority of users. Moreover, the cost is higher than that of ordinary pumps, and the used stainless steel materials are environmentally friendly materials, which can be recycled 99%. In recent years in casting, stainless steel pipeline pumps have been widely used in the market. Especially in recent years, countries in the food industry have put forward higher requirements. Stainless steel materials are safe and hygienic, and food-grade stainless steel should be used for food grade. KCB stainless steel gear oil pump is a representative material for fluids in the chemical industry.

KCB gear pump structure characteristics

KCB gear pump structure characteristics
This series of KCB gear oil pumps are mainly composed of gears, shafts, pump bodies, protection valves, and shaft end seals. The gear has high hardness and strength after heat treatment, and is installed in a replaceable bushing together with the shaft to run. The lubrication of all parts in the KCB gear oil pump is automatically achieved by using the output medium when the pump is working.
There are reasonably designed oil drain and oil return grooves in the pump. The gears bear less torque during work, so the bearing load is small, the wear is small, and the KCB gear oil pump has high efficiency.
The KCB gear pump is equipped with a protection valve as overload protection. The total return pressure of the protection valve is 1.5 times the rated discharge pressure of the pump. The KCB gear pump can also be adjusted according to actual needs within the allowable discharge pressure range. But note that this protection valve cannot be used for long-term operation of a pressure reducing valve, and can be installed separately on the pipeline when necessary.
Looking at the pump from the extended end of the main shaft, it rotates clockwise.

KCB gear pump uses and application range

KCB gear pump uses and application range:

KCB gear pump uses
KCB series gear oil pump is suitable for transporting lubricating oil or properties that do not contain solid particles and fibers, are non-corrosive, have a temperature not higher than 180°C, and a viscosity of 5×10-6～1.5×10-3m2/s (5-1500cSt) Other liquids similar to lubricating oil.

KCB gear pump application range
KCB gear oil pump can be used as a transmission and booster pump in the oil delivery system;
KCB gear pump can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
It can be used as a hydraulic pump to provide hydraulic power in the hydraulic transmission system;
KCB gear pumps can be used as lubricating oil pumps in the industrial field

KCB-300 Gear Pump

KCB series ordinary gear lubrication pump (gear pump KCB300) is mainly used to transport lubricating oil in the lubrication system of various mechanical equipment, suitable for transporting the viscosity of 10. E (75C.S.t) or less, lubricating oil with temperature below 300℃. The stainless steel gear pump can transport non-lubricating oils, beverages, and low-corrosive liquids. Equipped with copper gears, it can transport low internal point liquids, such as gasoline and benzene. In addition to ordinary motors, this series of pumps can also be equipped with explosion-proof motors of the same specifications according to user needs.
use
The KCB-300 gear pump is suitable for transporting lubricating oil that does not contain solid particles and fibers, is non-corrosive, the temperature is not higher than 180℃, and the viscosity is 5×10-6～1.5×10-3m2/s (5-1500cSt) or similar properties Other liquids of lubricating oil.
Scope of application
　　KCB-300 gear pump can be used as a transmission and booster pump in the oil delivery system;
It can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
In the industrial field, it can be used as a lubricating oil pump.
Structural features
　　 This series of KCB gear pumps are mainly composed of gears, shafts, pump bodies, and shaft end seals. The gear has high hardness and strength after heat treatment, and is installed in a replaceable bushing together with the shaft to run. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.
There are reasonably designed oil drain and oil return grooves in the pump. The gears bear small torque force during work, so the bearing load is small, the wear is small, and the efficiency is high.
The pump is equipped with overload protection, and the total return pressure is 1.5 times the rated discharge pressure of the pump, and it can also be adjusted according to actual needs within the allowable discharge pressure range. But note that this can not be used for long-term work of the pressure reducing valve, and can be installed separately on the pipeline when necessary.
Looking at the pump from the extended end of the main shaft, it rotates clockwise.
KCB gear pump manufacturers and suppliers

KCB gear pump introduction

KCB gear pump uses
KCB gear oil pumps are suitable for transporting lubricating oils or properties that do not contain solid particles and fibers, are non-corrosive, have a temperature not higher than 80°C, and a viscosity of 5×10-6～1.5×10-3m2/s (5-1500cSt) Other liquids similar to lubricating oil.

KCB gear pump application range
KCB gear pump can be used as a transmission and booster pump in the oil delivery system;
It can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
It can be used as a hydraulic pump to provide hydraulic power in the hydraulic transmission system;
KCB series gear oil pumps can be used as lubricating oil pumps in the industrial field;

KCB gear pump structure characteristics
This series of KCB gear pumps are mainly composed of gears, shafts, pump bodies, and shaft end seals. The gear has high hardness and strength after heat treatment, and is installed in a replaceable bushing together with the shaft to run. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.
There are well-designed oil drain and oil return grooves in the pump. The gears bear small torque force during work, so the bearing load is small, the wear is small, and the efficiency is high.
The pump is equipped with overload protection. The total return pressure is 1.5 times the rated discharge pressure of the pump, and it can also be adjusted according to actual needs within the allowable discharge pressure range. But note that it cannot be used for long-term work of the pressure reducing valve, and can be installed on the pipeline when necessary.
Looking at the pump from the extended end of the main shaft, it rotates clockwise.

KCB gear pump manufacturers and suppliers

Saiken manufacturers explain KCB-55 gear oil pump

Saiken manufacturers explain KCB-55 gear oil pump：

KCB-55 gear pump is mainly used for conveying lubricating oil in the lubrication system of various mechanical equipment, and is suitable for conveying the viscosity of 10. E (75C.S.t) or less, lubricating oil with temperature below 300℃. The stainless steel gear pump can transport non-lubricating oils, beverages, and low-corrosive liquids. Equipped with copper gears, it can transport low internal point liquids, such as gasoline and benzene. In addition to ordinary motors, this series of KCB gear oil pumps can also be equipped with explosion-proof motors of the same specifications according to user needs.

KCB-55 gear oil pump use
KCB-55 gear oil pump, KCB-83.3, KCB-33.3 are all suitable for conveying without solid particles and fibers, non-corrosive, temperature not higher than 180℃, viscosity 5×10-6～1.5×10-3m2/s (5-1500cSt) lubricating oil or other liquids with similar properties to lubricating oil.

KCB-55 gear oil pump application range
　　 KCB-55 gear oil pump can be used as a transmission and booster pump in the oil delivery system;
It can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
In the industrial field, it can be used as a lubricating oil pump.

KCB-55 gear oil pump structure characteristics
　 KCB-55 gear oil pump is mainly composed of gear, shaft, pump body and shaft end seal. The KCB-55 gear oil pump gear has high hardness and strength after heat treatment, and is installed in a replaceable bushing together with the shaft to run. The lubrication of all parts in the KCB-55 gear oil pump is automatically achieved by using the output medium when the pump is working.
There are reasonably designed oil drain and oil return grooves in the pump. The gears bear small torque force during work, so the bearing load is small, the wear is small, and the efficiency is high.
The pump is set as overload protection, and the total return pressure is 1.5 times the rated discharge pressure of the pump. KCB-83.3 can also be adjusted according to actual needs within the allowable discharge pressure range. But note that this can not be used for long-term work of the pressure reducing valve, and can be installed separately on the pipeline when necessary.
Looking at the pump from the extended end of the main shaft, it rotates clockwise.

KCB gear pump manufacturers and suppliers

Saiken manufacturers explain KCB-200 and KCB-300 gear pumps

KCB series general gear pumps (gear oil pump kcb-200, KCB-200, kcb200 gear pump) are mainly used to transport lubricating oil in the lubrication system of various mechanical equipment, suitable for transporting the viscosity of 10. E (75C.S.t) or less, lubricating oil with temperature below 300℃. The stainless steel gear pump can transport non-lubricating oils, beverages, and low-corrosive liquids. Equipped with copper gears, it can transport low internal point liquids, such as gasoline and benzene. In addition to ordinary motors, KCB gear pumps can also be equipped with explosion-proof motors of the same specifications according to user needs.

KCB gear pump uses
Gear oil pump kcb-200, KCB-200, kcb200 gear pump is suitable for conveying without solid particles and fibers, non-corrosive, temperature not higher than 80℃, viscosity 5×10-6～1.5×10-3m2/s ( 5-1500cSt) lubricating oil or other liquids with similar properties to lubricating oil.

KCB gear pump application range
KCB-300 gear pump can be used as a transmission and booster pump in the oil delivery system;
It can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
In the industrial field, it can be used as a lubricating oil pump.

KCB gear pump structure characteristics
　　 KCB gear oil pump kcb-200, KCB-200, kcb200 gear pump is mainly composed of gears, shafts, pump bodies, and shaft end seals. The gear has high hardness and strength after heat treatment, and is installed in a replaceable bushing together with the shaft to run. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.
The KCB gear pump has reasonably designed oil drain and oil return grooves. The gear bears a small torque force during work, so the bearing load is small, the wear is small, and the efficiency is high.
The KCB gear pump is equipped with overload protection. The total return pressure is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. But note that it cannot be used for long-term work of the pressure reducing valve, and can be installed on the pipeline when necessary.
Looking at the pump from the extended end of the main shaft, it rotates clockwise.

Introduction WRY hot oil pump

Introduction WRY hot oil pump：
The WRY hot oil pump has been widely used in my country’s heat carrier heating system, and has entered various industrial fields such as petroleum, chemical industry, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food, etc. It is mainly used for conveying non-solids The granular weakly corrosive high temperature liquid, the use temperature is not higher than 350 ℃, is an ideal hot oil circulating pump.

Structural features:

WRY series hot oil pump is the second generation product developed by our factory on the basis of digesting and absorbing foreign oil pumps. The basic structure is a single-stage single-suction cantilever foot support structure. The inlet of the pump is axial suction, and the outlet is the center vertically upwards. The motor is also installed on the base.

The support of WRY series hot oil pump adopts the structure of double-end ball bearing. The front end is lubricated with lubricating oil, and the back end is lubricated with grease. There is an oil guide pipe in the middle to observe the sealing condition and recover the heat transfer oil at any time.

The natural heat dissipation structure is adopted, and the traditional water cooling structure is changed, making the structure simple, small in size, saving operating costs, good performance, and reliable in use.

WRY series hot oil pump: (1) It adopts a combination of packing seal and mechanical seal. The packing seal uses high temperature resistant packing, which has good thermal adaptability, while the mechanical seal adopts a hard material with high mechanical strength and good wear resistance. The alloy material ensures the sealing performance under high temperature conditions.

(2) The third-generation polytetrafluoroethylene (PTFE for short) is used as the lip seal, which makes the sealing performance a leap, and the reliability is 25 times higher than that of rubber seals, and the corrosion resistance is extremely strong.

Advantages and characteristics of WRY hot oil pump

WRY hot oil pump and WRY heat transfer oil pump have reasonable structure, excellent performance and reliable use. It is suitable for conveying high temperature liquid without solid particles. The corrosion resistance and operating temperature of the RY series air-cooled Wuan heat transfer oil pump depend on the material of the main parts in contact with the medium (divided into three categories: 1.HT200; II.ZG230-450; III.1Cr18Ni9Ti, OCr18Ni12-Mo2Ti)
Advantages and features
WRY hot oil pump has advanced technology and high efficiency. It can run stably for a long time without leakage under hot conditions, has no additional cooling system, and is reliable in use. It has been widely used in my country’s heating medium heating system, and has entered the petroleum, chemical, and chemical industries. Rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food and other industrial fields,
WRY hot oil pump is mainly used to transport weakly corrosive high-temperature liquids without solid particles. The use temperature is less than 370°C. It is an ideal circulating pump. The heat conduction oil pump is widely used in high temperature setting of paper lunch boxes, dynamic vulcanization of tires and raw rubber machinery, flat vulcanization, rubber, drying, feed drying, printing and dyeing, chemical industry, plywood production, waterproof membrane production, asphalt heating, drying of dried noodles, etc. industry.
(1) WRY hot oil pump is a second-generation product developed on the basis of digesting and absorbing foreign oil pumps. The basic structure is a single-stage single-suction cantilever foot support structure. The inlet of the WRY hot oil pump is axial suction, and the outlet is the center vertically upward. Installed on the base together with the motor.
(2) The support of WRY hot oil pump adopts the structure of double-end ball bearing. The front end is lubricated with lubricating oil, and the back end is lubricated with grease. There is an oil pipe in the middle to observe the sealing condition and recover the heat transfer oil at any time.
(3) The WRY hot oil pump adopts a self-heating heat dissipation structure, which changes the traditional water cooling structure, making the structure simple, small in size, saving operating costs, good performance, and reliable in use.
(4) WRY hot oil pump adopts the combination of packing seal and mechanical seal. The packing seal uses high temperature resistant packing, which has good thermal adaptability, while the mechanical seal uses cemented carbide with high mechanical strength and good wear resistance. The material ensures the sealing performance under high temperature conditions. (5) The RY series air-cooled heat transfer oil pump adopts the third-generation polytetrafluoroethylene (PTFE for short) as the lip seal, which makes the sealing performance a leap, and the reliability is 25 times higher than that of rubber seals, and the corrosion resistance is extremely strong.
WRY hot oil pump performance range (according to design point)

Flow rate 1-500m3/h; 　　 2. Head 10-125m; 　　 3. Temperature 20℃-350℃

The structure and working principle of gear pump KCB-200

The structure and working principle of gear pump KCB-200
Gear pump KCB-200 structure:
The KCB-200 gear pump consists of an electric motor, a pressure limiter, and a check valve. The electric motor actually works in the fuel in the oil pump housing. Don’t worry, because there is nothing in the housing that can be ignited. The fuel can lubricate and cool the fuel motor. The oil outlet is equipped with a check valve, and the pressure limiter is located on the pressure side of the oil pump housing with a passage leading to the oil inlet.
Working principle of gear pump KCB-200:
When the rotor disc rotates, the roller is pressed outward by centrifugal force. Like a rotating oil seal, the rotor rotates and the pump works. It sucks in fuel from the oil inlet and presses the fuel into the fuel system from the oil outlet. When the oil pump is turned off , The check valve of the oil outlet is closed to prevent fuel from flowing back to the fuel tank through the gear pump KCB-200. The fuel pipe pressure maintained by the check valve is called “residual pressure”.
　　 Gear pump KCB-200 pump oil pressure greatly depends on the standard of the pressure limiter. If the gear pump KCB-200 pressure exceeds the predetermined pressure limit, the pressure limiter will open the bypass to allow fuel to flow back to the inlet of the gear pump KCB-200.

The structure and working principle of gear pump KCB-200

The structure and working principle of gear pump KCB-200
Gear pump KCB-200 structure:
The gear pump KCB-200 consists of an electric motor, a pressure limiter, and a check valve. The electric motor actually works in the fuel in the oil pump housing. Don’t worry, because there is nothing in the housing that can be ignited. The fuel can lubricate and cool the fuel motor. The oil outlet is equipped with a check valve, and the pressure limiter is located on the pressure side of the oil pump housing with a passage leading to the oil inlet.
Working principle of gear pump KCB-200:
When the rotor disc rotates, the roller is pressed outward by centrifugal force. Like a rotating oil seal, the rotor rotates and the pump works. It sucks in fuel from the oil inlet and presses the fuel into the fuel system from the oil outlet. When the oil pump is turned off , The check valve of the oil outlet is closed to prevent fuel from flowing back to the fuel tank through the gear pump KCB-200. The fuel pipe pressure maintained by the check valve is called “residual pressure”.
　　 Gear pump KCB-200 pump oil pressure greatly depends on the standard of the pressure limiter. If the gear pump KCB-200 pressure exceeds the predetermined pressure limit, the pressure limiter will open the bypass to allow fuel to flow back to the inlet of the gear pump KCB-200.

Manufacturers and suppliers of gear pumps